A free brochure provided by the Mott's MiniaturesTM On-Line Service and Cir-Kit Concepts.
The Cir-Kit "concept" of electrical wiring was first developed in 1976 and is now the predominant world-wide method of dollhouse wiring and electrification. A great measure of its success can be attributed to the ease of installation and professional appearance when finished. The Cir-Kit method allows anyone, even those without electrical knowledge, to successfully construct a completely hidden and "to scale" lighting system.
The heart of the Cir-Kit Concepts' electrical system is the flat, pressure-sensitive and adhesively-backed conductive tape used for wiring. It eliminates entirely the need for round wire and may be installed in a fraction the time of a conventional system.. A super strong adhesive applied across the entire width of the tape ensures a positive grip on any wood surface. The thinness of the tape allows easy masking with one or two coats of paint and produces a completely hidden installation when covered with wallpaper.
In a departure from conventional wiring techniques the adhesive-tape approach as employed by Cir-Kit Concepts requires absolutely no electrical soldering. Corners are created either by cutting and using tiny brass brads for electrical connection at the overlap points or by corner folding. Whichever procedure is used, only commonly available hand tools are required for installation.
The Cir-Kit Concepts' electrical system may be installed in a pleasing and unobtrusive manner in nearly any type dollhouse or miniature room. It can be applied either on an inside or outside wall, between walls on new construction, or in a combination of configurations to suit a particular design. The system represents perhaps one of the most flexible means of circuit wiring to be found anywhere. Its limitations are restricted only by the imagination of the user.
The Cir-Kit Concepts' Electrical System
The adjacent diagram depicts the manner in which the various Cir-Kit Concepts' parts are interconnected to form a working electrical system.
When the Cir-Kit Concepts' transformer is plugged into an operating 115 vac outlet, 12 volts is provided at its output and coupled to the house via the transformer lead-in wire. The junction splice is normally pounded into the first tape run on the house. The two nails protruding from the bottom make electrical contact with the copper foils and mechanically hold the splice in place. When the lead-in wire is plugged into the junction splice, 12 volts is coupled through the splice and into the first tape run. As subsequent tape runs are added and electrically connected, either with 1/8" brass brads or by folded corners, 12 volts passes automatically from one tape run to the next. (The pilot hole punch is used for making the necessary brad starter holes at each corner.) After all tape runs are in place, outlets and lighting fixtures may be installed to form a complete lighting system.
If you are ready to wire, click here.
We strongly recommend that you come down to Motts and take a look at what is available. We are sure that we can find a dollhouse kit that is right for you. If you want, you can also visit our On-Line Mail Order Catalog.
|For more dollhouse tips, see our other free online brochures:|
Contact Mott's | How To Place An Order | Log In to Your Account | Mail Order Catalogs | Our Shop
Ordering Information & Policies | Newsletter | Directory | Area Visitor Information
Free Stuff | On-Line Catalog | Search Our Site | New Releases
Mott's Miniatures & Dollhouse ShopTM, P.O. Box 693, Placentia, CA 92871-0693
Sales Department Only, Sales Inquiries ONLY (562) 916-3280 For ALL questions including customer service and questions about existing orders Contact Mott's Miniatures
This page last updated March 18, 2017 19:36 hrs pst.
This site maintained by Mott's Miniatures Inc.